Energetics XT 1090 Series Manual page 13

Computerinstruction
Display view
Program Buttons
Control keys
Display view
Power up
The Elliptical is supplied with an external power supply. When power is connected to the Elliptical, the console
will automatically power up. If there is no input to the console for 20 minutes the console will go to stand-by
mode. In stand-by mode the console display will turn off. To turn the console on press any key.
When initially powered on the console will perform an internal self test. During this time all the lights will turn
on. When the lights go off the dot matrix display will show a software version (ie: VER 1.0) and the message
window will display an odometer reading. The odometer reading displays how many hours the elliptical has
been used and how many virtual miles the elliptical has gone. The display will look like this: ODO 123 MI 123
HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up display. The
dot matrix display will be scrolling through the different profiles of the programs and the message window will
be scrolling the start up message. You may now begin to use the console.
13
Fan (Mod. A25)
Mod. A26 w/o Fan
Dot Matrix
Heart rate Indicator
Heart rate bar graph
Fan Power switch
(Mod. A25)
Message window
Pulse sensors