Table of Contents
Advertisement
Wall Bracket Mount
1. Fasten the docking station mounting bracket to a wall, with the bottom edge of the
bracket 98±20 mm (3.8±0.8 inches) above the floor.
2. Fasten two shoulder bolts, each with a washer, into the rear of the docking station.
Tighten to 9 N·m (80 in-lb).
20472-000 Rev B
Figure 3-14 Docking Station Dimensions
Callout Installation Method and Orientation
A
Free standing, side view
B
Free standing, side view
C
Wall mount bracket
D
Wall and floor mount, top view
E
Wall and floor mount, side view
LD-250 Platform User's Guide
Chapter 3: Setup
61
Advertisement
Table of Contents
