Obtain A Debuginfo File From Setnetgo - Omron LD-250 User Manual

1.4 How Can I Get Help?
5. Click the radio button next to Use the following IP address.
6. Enter 1.2.3.5 as the IP address and 255.255.255.0 as the Subnet mask.
7. Click OK twice to exit both Properties dialogs, and then close the Network Connections
screen.
You can now use this TCP/IP port connection to access the SetNetGo Web UI:
1. Open a Web browser on the PC and enter https://1.2.3.4 as the URL.
2. If prompted to accept security certificates, confirm that you accept them.
To access the DebugInfo file, see: Obtain a DebugInfo File from SetNetGo on page 26.

Obtain a DebugInfo File from SetNetGo

After you access SetNetGo as described in the preceding sections, you will see the following
screen:
26
Figure 1-9 Dialogs for the Ethernet Properties
Figure 1-10 SetNetGo Status Tab
LD-250 Platform User's Guide 20472-000 Rev B