Table of Contents
Advertisement
8.5 Wheel Lift Tool
!
!
Safe lifting points are:
load-bearing T-slotted extrusions in the payload bay.
l
The caster mount points.
l
Any part of the underside of the steel chassis that is not a sensor location.
l
Do not lift the LD-250 by:
Any of the skins.
l
Any part of the chassis that contains a sensor component.
l
8.5 Wheel Lift Tool
A wheel lift tool is provided so that you can lift the drive wheels for maintenance tasks. This
tool is located on the right side of the LD-250, underneath the side skin as shown in Figure 8-2.
146
CAUTION: PROPERTY DAMAGE RISK
Lifting the LD-250 from the wrong points can cause damage.
DANGER: PERSONAL INJURY OR PROPERTY DAMAGE RISK
When lifting the LD-250 take all precautions to lift it safely at only the des-
ignated lift points and to secure the LD-250 when it is in an elevated position.
Do not work under the LD-250 if it is not secured in the lifted position with
safety straps. Failure to do so might result in serious personal injury or death
or damage to property.
Figure 8-2 Location of the Wheel Lift Tool
LD-250 Platform User's Guide
20472-000 Rev B
Advertisement
Table of Contents
