Training Of Qualified Personnel; Additional Information; Service; Product Overview - Festo EHPS LK Series Instructions & Operating

Additional information

2.3

Training of qualified personnel

Installation, commissioning, maintenance and disassembly should only be conducted by qualified per-
sonnel. The qualified personnel must be familiar with installation of electrical control systems.
3 Additional information
– Accessories è www.festo.com/catalogue.
4

Service

Contact your regional Festo contact person if you have technical questions è www.festo.com.
5

Product overview

5.1

Function

The gripper has an integrated motor. The gripper mechanism converts the rotary motion of the motor
into a linear motion of the gripper jaws.
The gripper jaws move towards one another (closing) or apart (opening). Gripper fingers are fastened
to the gripper jaws.
The payload can be gripped in 2 ways:
– on the external contour (external gripping) when closing
– on the internal contour (internal gripping) when opening
The parallel gripper is controlled via an IO-Link interface.
6 Festo — EHPS-...-LK — 2019-08