Checking Installation And Establishing A Connection - Siemens Gigaset 300 Manual

Installing the Gigaset USB Adapter 300
Note for installation on Windows Vista
Depending on the Windows Vista version on your PC, a newer version of the driver for
Gigaset USB Adapter 300 may be on your computer.
ì
Click YES to use this driver (recommended).
Click No to overwrite it with the driver from the CD-ROM.
ì
Select the option Finish in the next window to close the hardware wizard.
ì
If you are prompted to restart the PC, select this option and click Finish.
The installation will be finished.

Checking installation and establishing a connection

If installation was successful, you can now use the Gigaset WLAN Adapter Monitor.
Use the Gigaset WLAN Adapter Monitor to configure your Gigaset USB Adapter 300
and establish a connection to other network adapters or to an access point.
The Gigaset WLAN Adapter Monitor is represented by an icon in the status area of the
taskbar. This icon shows you if there is a connection to a connection partner and the
quality of the connection.
A connection is only possible if you have configured the security setting for your Gigaset
USB Adapter 300 beforehand either via
16
WPS (see page 16) or manually (see page 31).