Connecting - Siemens SIMATIC ET 200SP Manual

4.2

Connecting

Installing the bus connector
Install the PROFINET connector according to the instructions in the PROFINET Installation
Guide (http://www.profibus.com/).
Tools required
3 to 3.5 mm screwdriver, alternatively TX10 (torx).
Accessories required
● Connector:
– IE FC RJ45 plug 180 2X2 (6GK1901-1BB10-2A)
– IE FC RJ45 plug 180 4X2 (6GK1901-1BB12-2A)
● Cables:
– IE FC TP standard cable (6XV1840-2A)
– IE FC TP trailing cable (6XV1840-3AH10)
– IE FC TP marine cable (6XV1840-4AH10)
– IE FC TP robust cable (6XV1841-2)
– IE TP torsion cable (6XV1870-2F)
● Please observe the specifications in the PROFINET Installation Guide
(http://www.profibus.com/).
BusAdapter
Manual, 03/2018, A5E41449003-AA
BusAdapter BA 2xRJ45
4.2 Connecting
15