Connecting The Isdn Adapter - Siemens I-SURF User Manual

5. USB Installation

5.3 Connecting the ISDN Adapter

Please note that the installation CD should be inserted before connecting the
hardware for the first time.
1. Connect the ISDN cable (included) to the ISDN Adapter and a properly installed ISDN
(S bus) jack.
0
2. Connect the USB cable (included) to a free USB port on your computer or USB hub and
to the ISDN Adapter.
3. Turn on your PC now if it was not running when you plugged in the two cables. Windows
98/Windows 2000 will immediately and automatically start installing the software.
If the USB cable is connected while the PC is running, Windows 98 or Windows 2000
will automatically start the Hardware Wizard and initiate installation. Software installation
is discussed in detail in the following chapter.
16