Wwan Installation, Configuration, Test; Fig. 12.4: Wwan Module, Check Network Status - Advantech DLoG DLT-V4108 Manual

12.6.

WWAN Installation, Configuration, Test

The following information describes the installation on Advantech OS Image, it including 64-bit
WES7 /WES8/WIN10 Operation system.
NOTE
Before enable WWAN Module & GPS Function, please connect external WWAN & GPS
Antenna first. We recommend using WWAN & GPS Antenna which already approved by
Advantech-DLoG.
WWAN setting & Test (In WES8)
In DLT-V4108, WWAN Module's driver already bundles into OS Image and NO need to do
additional driver installation.
Before enable WWAN Module , check Device Manager 's COM Port setting to make sure the
COM ports have been set up as shown in the figure below
How to enable WWAN Module (use WES8 as example)
−
Select [Settings] -> enter [Available] to check network status.

Fig. 12.4: WWAN module, check network status

42 / 81 DLT-V4108 Manual, V01 Prelim
Wireless options configuration
Advantech-DLoG