Ms-Windows Os (Optional); Ms-Win. 10: Deactivate Automatic Windows Updates - Advantech DLoG DLT-V4108 Manual

10.

MS-Windows OS (optional)

The following operating systems are available for DLT-V4108 (at the time of the creation of the
manual, as of: August 2017:
− MS Windows
− MS Windows
− MS Windows
− MS Windows
− MS Windows
Pre-installed on flash
If a DLT-V4108 with preinstalled operating system is placed into operation, this operating system
will be loaded after the BIOS system messages. System-specific device drivers (e.g. for graphics,
sound, network, touchscreen) are already installed.
In DLT-V4108 units with a pre-installed operating system, the system is located on the
C partition.
Installing on flash
When a DLT-V4108 is started up for the first time without a pre-installed operating system, the
user needs to carry out a number of steps that will vary depending on the system to be installed.
Refer to the relevant operating system manual for specific instructions.
10.1.

MS-Win. 10: Deactivate Automatic Windows Updates

In MS-Windows 10 it´s no longer possible to deactivate the windows updates by use of the
Windows Update dialog. The setting Never check for updates is not selectable.
With the following entry in the MS-Windows Registry it´s still possible to set the MS-Windows
Update state to Never check for updates:
−
Create the following entry (dwords) manually:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"=dword:00000001
−
Reboot MS-Windows.
−
You have to search updates once again to change the windows update state:
Open Start -> Settings -> Update & security -> Windows Updates.
−
Click to Retry.
−
Click to Advanced Options.
30 / 81
®
10 IoT Enterprise
®
7 Professional
®
Embedded Standard 7 (WES7)
®
Embedded 8.1 Industry Pro
®
Embedded 8 Standard (WE8S)
DLT-V4108 Manual, V01 Prelim
MS-Windows OS (optional)
Advantech-DLoG