Disk Drive Locations And Service Indicators For The 5786, 5787, 7031-D24, And 7031-T24 Scsi Disk-Drive Enclosures - IBM 8202-E4B Manual

Figure 68. Disk drive locations
Related information:
Cabling the 5802 disk subsystem
Disk drive locations and service indicators for the 5786, 5787,
7031-D24, and 7031-T24 SCSI disk-drive enclosures
Learn about the disk drive locations and where the service indicators are located for your disk-drive
enclosure.
The availability of disk drive locations depends on the number of SCSI interface cards installed in the
SCSI disk-drive enclosure. If the next available disk drive position is the first slot in a disk-drive
enclosure, such as D21, D26, or D46, look at the disk drive controller to verify that the enclosure is
connected to a SCSI bus port. The controller end of the cable is clearly labeled with the disk-drive
enclosure to which it connects. If the enclosure is not connected to a disk drive controller, you must either
install the disk drive in a different disk-drive enclosure or connect the enclosure to a SCSI bus port on a
disk drive controller. You might need to add a disk drive controller before you can add disk drives to the
expansion unit.
The following figures show the disk drive locations for the front and rear of the 5786, 5787, 7031-D24,
and 7031-T24 SCSI disk-drive enclosures.
100
Disk drives or solid-state drives