IBM 8202-E4B Manual page 57

Display Hardware Status
Type option, press Enter.
1=Display hardware resource information details
OPT Name Resource Path/Address
--- ------ -------------------------- -------- ---------------- ----------------
sg23 FE
sg0 00-0E-01
sg1 00-0E-0A
sg2 00-0E-0B
sg3 00-0E-03
sg4 00-0E-09
sg5 00-0E-02
sg6 00-0E-04
sg7 00-0C-26
sg8 00-0E-26
sg47 FE
sg26 00-0E-01
sg27 00-0E-0A
sg28 00-0E-0B
e=Exit q=Cancel r=Refresh
Figure 25. Example Display Hardware Status
10. Look for the drive at the SCSI location you recorded. The drive might have a Failed status.
11. Return to the IBM Power RAID Configuration Utility display.
12. If you are removing a solid-state device located on a PCIe RAID and SSD SAS adapter, go to
Removing and replacing the SAS RAID adapter, and complete that procedure.
13. From the IBM Power RAID Configuration Utility display, select Work with disk unit recovery. Press
Enter.
14. From the Work with Disk Unit Recovery display, select Concurrent remove device, and press Enter.
A Concurrent Device Remove display is shown, similar to the following examples shown in
Figure 26 on page 42 and Figure 27 on page 43.
Vendor
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
IBM
More...
t=Toggle f=PageDn b=PageUp
Product ID Status
57CE001SISIOA Operational
SG9XCA2E200GEIBM Active
SG9XCA2E200GEIBM Active
SG9XCA2E200GEIBM Active
SG9XCA2E200GEIBM Active
SG9XCA2E200GEIBM Active
SG9XCA2E200GEIBM Failed
SG9XCA2E200GEIBM Active
5887 Active
5887 Active
57CE001SISIOA Operational
SG9XCA2E200GEIBM Remote
SG9XCA2E200GEIBM Remote
SG9XCA2E200GEIBM Remote
Disk drives or solid-state drives
41