IBM 8202-E4B Manual page 126

10. Type iprconfig on the command line and press Enter.
The IBM Power RAID Configuration Utility display is shown.
11. Select Display hardware status from the IBM Power RAID Configuration Utility display. Press Enter.
The Display Hardware Status display is shown.
Type option, press Enter.
1=Display hardware resource information details
OPT Name PCI/SCSI Location
--- ------ -------------------------- ------------------------- ----------------
0000:01:00.0/0:
0000:01:00.0/0:0:0:0
0000:01:00.0/0:0:1:0
0000:01:00.0/0:0:2:0
0000:01:00.0/0:0:3:0
0000:01:00.0/0:0:4:0
0000:01:00.0/0:0:5:0
0000:01:00.0/0:0:6:0
0000:01:00.0/0:0:8:0
0000:01:00.0/0:0:9:0
0001:01:00.0/1:
0001:01:00.0/1:0:3:0
0001:01:00.0/1:0:4:0
0001:01:00.0/1:0:5:0
e=Exit q=Cancel r=Refresh
Figure 83. Example Display Hardware Status
12. Look for the drive at the PCI location you recorded. The drive might have a Failed status.
13. If the drive you want to replace is unprotected or in use, move the data from the drive before
continuing with this procedure.
For PCI-X controller information, see the PCI-X SCSI RAID Controller Reference Guide for Linux. This
guide is available from the SCSI PCI Adapters web page.
For SAS RAID controller information, see the SAS RAID controllers for Linux topic.
14. Type 1 (Display hardware resource information details) next to the drive you want to replace. Press
Enter.
The Disk Unit Hardware Resource Information Details is displayed like the shown in the following
sample.
110
Disk drives or solid-state drives
Display Hardware Status
Description
PCI-E SAS RAID Adapter
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
Enclosure
Enclosure
PCI-E SAS RAID Adapter
Advanced Function SSD
Advanced Function SSD
Advanced Function SSD
More...
t=Toggle f=PageDn b=PageUp
Status
Operational
Active
Active
Active
Active
Active
Failed
Active
Active
Active
Operational
Remote
Remote
Remote