Removing A Solid-State Drive From The Edr1 Pcie Storage Enclosure; Removing A Disk Drive Or Solid-State Drive From The 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, Or 8205-E6D Or An Expansion Unit Controlled By Ibm I - IBM 8202-E4B Manual

Disk drives or solid-state drives
Hide thumbs Also See for 8202-E4B:
Table of Contents

Advertisement

5. Grasp the solid-state drive and pull it out from the slot. Press Enter on the console to indicate that
you have removed the solid-state drive. The identify LED turns off.
Figure 30. Removing the solid-state drive from the EDR1 PCIe storage enclosure
If you are installing a replacement solid-state drive, proceed to the procedure for replacing the solid-state
drive in the EDR1 PCIe storage enclosure. For instructions, see "Replacing a solid-state drive in the EDR1
PCIe storage enclosure" on page 71.
If you are not installing a replacement solid-state drive, install a filler in the empty slot to ensure proper
air flow for cooling. For instructions, see "Installing a disk drive filler in the 8202-E4B, 8202-E4C,
8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D" on page 93.
Removing a disk drive or solid-state drive from the 8202-E4B,
8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D or an
expansion unit controlled by IBM i
Learn how to remove a disk drive or solid-state drive from a system or expansion unit with the IBM i
operating system or logical partition that controls the drive location is powered on.
If you are removing a drive in order to install a new or upgraded drive, see "Installing a disk drive or
solid-state drive in the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D with the IBM i
system or logical partition power turned on" on page 20. If you are removing a drive as part of a service
procedure, continue to use the following procedure.
Complete the following tasks to remove a drive:
v "Preparing the system" on page 47
v "Preparing to remove a disk drive or solid-state drive" on page 47
v Select from the following options:
– "Removing the disk drive or solid-state drive from the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B,
8205-E6C, or 8205-E6D system or expansion unit" on page 50
46
Disk drives or solid-state drives

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8205-e6b8205-e6d8202-e4c8202-e4d8205-e6c

Table of Contents