Drive Configurations And Numbering - H3C UniServer R6900 G3 User Manual

Fault/UID LED status
Steady amber
Steady blue
Off
Off
Off

Drive configurations and numbering

The numbers of storage controllers in tables
to all storage
RAID-LSI-9460-16i(4G), only one storage controller is required.
48SFF server
Table 11-6
types of storage controllers and NVMe SSD expander modules.
for the 48SFF server.
These drive configurations use the same drive numbering scheme, and drives with the same number
are distinguished by the compute module they reside in, as shown in
Table 11-6 Drive, storage controller, and NVMe SSD expander configurations (48SFF server)
Drive configuration
48SFF (48 SFF SAS/SATA drives)
48SFF (24 SFF SAS/SATA drives)
Table 11-7 Drive population (48SFF server)
Drive configuration
48SFF
(48 SFF SAS/SATA drives)
24SFF
(24 SFF SAS/SATA drives)
NOTE:
"N/A" indicates that the compute module is not required but a compute module blank must be
installed.
Present/Active LED status
Steady green/Flashing green
(4.0 Hz)
Steady green/Flashing green
(4.0 Hz)
Flashing green (4.0 Hz)
Steady green
Off
controllers except for
presents the drive configurations available for the 48SFF server and their compatible
Compute module 1
24 SFF SAS/SATA drives
24 SFF SAS/SATA drives
Description
The drive is faulty. Replace the drive
immediately.
The drive is operating correctly and selected
by the RAID controller.
The drive is performing a RAID migration or
rebuilding, or the system is reading or
writing data to the drive.
The drive is present but no data is being
read or written to the drive.
The drive is not securely installed.
Table 11-6, Table
the RAID-LSI-9460-16i(4G).
Storage controller
2 × storage controllers
1 × storage controller
11-9
11-8, and Table 11-10
If you
Table 11-7 shows drive population
Figure 11-3.
NVMe SSD expander
N/A
N/A
Compute module 2
24 SFF SAS/SATA drives
N/A
are applicable
install the