Replacing The Power Supply Air Baffle - H3C UniServer R6900 G3 User Manual

10. Install the compute module access panel. For more information, see
module access
11. Install the compute module. For more information, see
12. Install the removed security bezel. For more information, see
13. Connect the power cord. For more information, see
14. Power on the server. For more information, see

Replacing the power supply air baffle

Power off the server. For more information, see
1.
Remove the server if the space over the server is insufficient. For more information, see
2.
"Removing the server from a
Remove the chassis access panel. For more information, see
3.
panel."
Remove the power supply air baffle. Hold the notches on the air baffle and lift the air baffle out
4.
of the chassis, as shown in
Figure 7-17 Removing the power supply air baffle
Install the power supply air baffle. Place the air baffle in the chassis, as shown in
5.
Make sure the four standouts on the air baffle are aligned with the notches on the chassis.
panel."
rack."
Figure 7-17.
"Installing a compute
"Connecting the power
"Powering on the
"Powering off the
7-13
"Replacing a compute
module."
"Installing the security
cord."
server."
server."
"Replacing the chassis access
Figure
bezel."
7-18.