Sata Configuration; Bios Menu 4: Sata Configuration; Sata Controller(S) [Enabled]; Sata Mode Selection [Ahci] - IEI Technology TRN-TABLET3 User Manual

4.3.2 SATA Configuration

Use the SATA Configuration menu (
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Controller(s)
SATA Mode Selection
M2_M1 Slot
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 4: SATA Configuration

SATA Controller(s) [Enabled]


Use the SATA Controller(s) option to configure the SATA controller(s).

Enabled

Disabled


SATA Mode Selection [AHCI]

Use the SATA Mode Selection option to determine how SATA devices operate.

AHCI
Page 26
BIOS Menu 4) to change and/or set the
434H514H8 10H
[Enabled]
[AHCI]
M.2 (S80) 3MG2 (496.1GB)
D
EFAULT Enables the on-board SATA controller(s).
Disables the on-board SATA controller(s).
D
EFAULT Configures SATA devices as AHCI device.
TRN-TABLET3
Enable/Disable SATA
Device.
---------------------
: Select Screen
 : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit