ALGE-Timing TdC 8000 Manual page 77

Count Down Time 2: Menu 44
You can adjust the count down time between 0 and 6399.99 seconds. The count down time is the
time between the greeting of the judges and the time when the rider must start. It is possible to
show the count down time on a display board (see menu 43). A horn (if connected) honks at the
start and end of the count down.
Menu 44: COUNT DOWN TIME 2 = 000030.00
Save with:: ENTER
Pre adjusted value::
Countdown for Display Board
You can switch off the countdown for the display board. All other functions of the countdown work, if
the countdown for the display board is off.
Menu 45: D-Board Count Down
Save with:: ENTERSave and exit with <ENTER>
Pre adjusted value::
TIMEOUTSIGNAL:
With this function you can turn the horn for the Timeout On or OFF.
Menü 46: TIMEOUTSIGNAL
Save with:: ENTER
Pre adjusted value::
PTO sofort addierent:
For the Scoreboard you can add the PTO Imediately.
This is more exiting for the public!
Attention! The FEI want to show allways the pure runtime!
Menü 47: add PTO immediate
Save with:: ENTER
Pre adjusted value:
Version: E-01-08-08
TdC 8000 for Equestrian
Count Down Time = 000030.00
Count Down Time = 30 seconds
Menu 45
ON<
OFF
D-Board Count Down = on
Menü 46
ON <
OFF
Timeoutsignal ON
Menü 47
ON <
OFF
Add PTO immediate is OFF
Input count down time
Save and exit with <ENTER>
D-Board Count Down = ON
output on display board
no output on display board
TIMEOUTSIGNAL = EIN
ON or OFF
Save and exit with <ENTER>
PTO sofort addieren = AUS
ON or OFF
Save and exit with <ENTER>
Page 77
Page 77