Table of Contents
Advertisement
6.1.9.
Table C - Time Penalty Jumping (Bareme C):
1
2
Start
You can use this program for Time Penalty Jumping (bareme C). Generally it has no penalty points,
but penalty seconds. For each obstacle drop you add a time penalty, depending on the course
length and amount of obstacles.
Adjustment:
-
Switch TdC 8000 on (switch 26)
-
Select program 11 "Show Jumping" with cursor key (¢ and £)
-
Press <ENTER>
-
Select program 116 "Time Penalty Jumping" with cursor key (¢ and £)
-
Press <ENTER>
-
Select race that you want to use and clear memory (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select race (e.g. <F1> for race 1)
-
Press <ENTER>
-
Select the precision with key <F1> to <F4>. Standard is <F3> with 1/100 seconds
-
Press <ENTER>
-
Synchronize the TdC 8000 (with time of day and other timing devices)
-
press <F1> if the finish display (7) shows the correct time of day
-
wait until TdC 8000 gives at the next full minute the synchronize signal to external
devices (you are now ready for timing)
-
press <F2> if the finish display (7) shows the wrong time of day
-
input the time of day, confirm it with <ENTER> and make a start signal (channel 0 or
press <START>
-
Press <ALT> and <MENU> together.
-
Adjust menu 36, 37, 39, 41, 43, and 45 as required by the circumstances of your event (see
next page).
-
Exit the menu when you did all adjustments with <NO>.
Race operation:
-
Input the start number for the start with start keyboard (9) (#1)
-
Press <ENTER>
-
The start-display (2) must show the correct start number
-
Display (7) must show the correct countdown time (e.g. 60 seconds)
-
Display (8) shows the penalty seconds for obstacle drop and time violation (left field) and
penalty seconds for obstacle set up (right field).
-
Make the start free by pressing <START> (or handswitch on channel 9). The countdown
starts.
-
The loudspeaker honks (if connected to socket 25) and gives the start free signal
-
Display (7) shows the countdown
-
If the rider does not pass the start photocell before the end of the countdown it will honk at
the
zero time
-
When the rider passes the start photocell it will start the time (display 7)
-
Input penalty seconds for obstacle drop by pressing <ENTER> (keyboard 15)
-
Correction of total penalty points (obstacle drop) by input of total amount and pressing
Version: E-01-08-08
TdC 8000 for Equestrian
3
4
5
Obstacles
Program 120
6
7
Finish
Page 57
Page 57
Advertisement
Table of Contents
Need help?
Do you have a question about the TdC 8000 and is the answer not in the manual?