ALGE-Timing TdC 8000 Manual page 108

Display Time 2: Menu 5:
You can adjust the amount of time that it shows the second stopped time in the second heat (total
time or run time) on the display (7) or display board. This time we call display time 2. You can select
the display time between 0 and 99 seconds.
Menu 5: DISPLAY Time 2 = 03 s
Save with: ENTER
Pre adjusted value: Display Time 2 = 3 seconds
Display Board Channel 2: Menu 18: D-BOARD CHANNEL 2 = OFF
You can adjust the channel 2 of the display board interface (24). If you have channel two on it
outputs no running time (only run times). It outputs the classement always on channel 2. You can
select between channel 1 and channel 2 by turning the plug of the display board cable 180°.
Menu 18: D-BOARD CHANNEL 2
Save with: ENTER
ON = <F1>
OFF = <F2>
Pre adjusted value:
Version:E-00-08-08
TdC 8000 for Equestrian
DISPLAY TIME 2 = 03 s
OFF<
run time and classement
running time and classement
D-Board Channel 2 is off (running time)
input seconds with finish keyboard (15)
Confirm input with <ENTER>
F1 output of run times
ON
F2 output of running time
Confirm selection with <ENTER>
Page 108
Page 108