Clear Memory; Select A Race - ALGE-Timing TdC 8000 Manual

2.5.2.

Clear Memory

After turning the TdC 8000 on (switch 26) you have to select the program. Then you are asked if
you want to clear the memory. The info-display (6) shows the following message:
Clear race:
Continue: ENTER
By pressing the <F> key you select the race that you want to clear. You can select different races at
the same time. It clears the memory when you press the <ENTER> key of the finish keyboard (15).
E.g.: If you clear race 1 and 3 it shows the following figures on the info-display (6):
Clear race:
Continue: ENTER
If you press <ENTER> without pressing an <F> key it will not clear the memory.
2.6.

Select a Race

After clearing the memory you have to select the race that you want to use. You can keep a maxi-
mum of four races at the same time in the memory. Each race is completely independent. This
means that for each race you can use the same bib numbers from 1 to 9999 and you can make up
to 256 heats.
Select race:
Continue: ENTER
Two numbers are shown for each race. The first number shows how much memory you have used,
and the second how much memory you have available. For a cleared race it shows zero as first
number. When "select race" is displayed the cursor will be placed on the previous race. If you want
to select that race again press <ENTER>. If you want to select a different race you can select with
key <F1>, <F2>, <F3>, or <F4>. The race selected is always marked with an arrow.
Memory was not cleared:
If you select a race that is not cleared it will show the following message in the info-display (6):
Select Heat:
Continue: ENTER
If you select the same heat, you can continue to work in that same heat as you worked before.
If you select the next heat, then a new heat is started.
If you select a new heat:
- All valid run times (or total times) will be stored as memory time
- All other times will be cleared (e.g. start-, finish- ,intermediate time)
Version: E-01-08-08
TdC 8000 for Equestrian
9746/
0/
651/ 6473 R3
943/ 6473 R4
9046/
0/
651/6473 R3< F3
943/6473 R4
7012/ 2987 R1< F1
0/ 2987 R2
651/ 6473 R3
943/ 6473 R4
You can clear each
253 R1 F1
race individually with
253 R2 F2
the <F> keys.
F3
F4
253 R1< F1
253 R2 F2
F4
F2
F3
F4
(1) means first heat
SAME (1)< F1
(2) means sec. heat
NEXT (2) F2
Page 17
Page 17