Standard Show Jumping Table A2: Program 112; Standard Show Jumping Table Am3: Program 113 - ALGE-Timing TdC 8000 Manual

For equestrian
Hide thumbs Also See for TdC 8000:
Table of Contents

Advertisement

6.1.2.
Standard Show Jumping Table A2:
Show Jumping Table A2:
To operate this program see page 42, 6.1.1. Standard Show Jumping A1
6.1.3.
Standard Show Jumping Table AM3:
Stanadrd Competition
1
2
3
Start
¼ penalty point per started second time violation
Jump Off
1
2
3
Obstacles
Start
1penalty point per started second time violation
Show Jumping Table AM3:
To operate this program see page 42, 6.1.1. Standard Show Jumping A1
Make a classement before you change to the jump off. All competitors that are not allowed for the
jump off will not be in the classement of the jump off.
Changing to the Jump Off:
In order to change form the standard competition to the jump off you must use Menu 24 "CHANGE
PARCOUR". You can get into the menu by pressing <MENU> and <ALT> simultaneous. Now use
the cursor keys to change to Menu 24 and press <YES>. In the jump off you can use any start
number again. Normally only riders with no penalty points in the standard competition are qualified
for the jump off.
-
The info display (6) shows the following:
Select parcour:
Continue: ENTER
-
Select Jump Off with key <F2> and confirm with <ENTER>
-
Adjust the following menus (see page 44): Menu 37 (time violation 1), Menu 39 (Parcour
Time
1), Menu 41 (Block Time 1), and Menu 43 (Count Down Time 1).
For the jump off you have a new parcour time. Mostly you have as well a new time violation (1
point per started second time violation). Important is as well, that you adapt the block time to
the new parcour time, if you use the block time.
-
Leaf the menu with <NO> after you made all changes.
-
Continue to work as in the standard competition.
Version:E-00-08-08
TdC 8000 for Equestrian
Stage:
no jump off
4
5
6
Obstacles
4
5
Finish
Stage:
Jump off: r anking by points and time
PARCOUR 1
JUMP OFF 1< F2
ranking by points and time
7
Finish
ranking by points
back to standard competition
F1
Continue with jump off
Page 52
Program 112
Program 113
Page 52

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TdC 8000 and is the answer not in the manual?

Questions and answers

Table of Contents