ALGE-Timing TdC 8000 Manual page 3

1 Switch for start number input with three
positions:
up:increment up automatically as
each racer starts
middle:manual input of start
numbers with keyboard (9)
down: increment down automatically as
each racer starts
2 Display for the start
3 External supply LED status light
4 Meter for monitoring power supply,
alignment of the photocell (c1 to c9)
5 View port to examine paper supply
6 Info-display 4 x 40 alphanumeric
characters
7 Display that shows the running and net
time that corresponds with the start
number input on the finish keyboard
(15)
8 Display that show the start number input
for finish
9 Start keyboard:
START manual start impulse
CLEAR clear false start
BLOCK blocks start impulses for as
long as you press it
INPUT edit start times
ENTER confirm input
0 to 9 numeric keys to input start
numbers for the start or
editing start times
10 paper advance wheel
11 cover release button to open the
printer cover (13) to change the paper
12 paper cutter
13 printer cover (open with cover
release button 11)
14 Function keyboard:
YES key to confirm YES/NO questions
NO key to deny YES/NO questions
PRINT to switch the printer on and off
Buffer mode on or off
+ PRINT: Printer on or off
TEST info-display (6) shows the device
test
key to go up
key to go down
key for special functions
CLASS key to make a classement
MEMO to activate the memo function if
more competitors reach the finish
at the same time
MENU press this key first, followed by
another to activate a special
function: With
<MENU> you get into the main
menu
Version: E-01-08-08
TdC 8000 for Equestrian
15
STOP
CLEAR
BLOCK
INPUT
ENTER
0 to 9
16
17
18
19
20
21
22
23
24
25
26
27
c0
c1
c2
c3
c4
c5
c6
c7
c8
and c9
28
press this key first, followed by another
to activate a special function: With
<ALT> and <PRINT> you toggle the
printer on and off.
function key 1 on info-display
function key 2 on info-display
function key 3 on info-display
function key 4 on info-display
Finish keyboard:
manual stop impulse
clear false finish
blocks finish impulses for as long
as you press it
edit of finish times
confirm input
numeric keys to input start
numbers for the finish or editing
finish times
Connection for Extender and Multi
Channel (channel 0 to 9)
Volume for headset
Jack for the headset
DIN-jack mainly used to connect the
finish photocell (inputs c0, c1, c2).
Connection of power supply is possible.
Identical with DIN-jack (20)
DIN-jack mainly used to connect the
finish photocell (inputs c0, c1, c2).
Connection of power supply is possible.
Identical with DIN-jack (19)
DIN-jack mainly used to connect the a
intermediate photocell (inputs c3, c4,
c5). Connection of power supply is
possible.
DIN-jack mainly used to connect the a
intermediate photocell (inputs c6, c7,
c8). Connection of power supply is
possible.
Two identical DIN-jacks with RS-232
and RS-485 interface.
DIN-jack to connect a ALGE GAZ
DIN-jack to connect a speaker (Horn)
On / Off - switch
banana socket for all 10 timing
channels. The four black jacks are
common grounds for all channels.
Start channel
finish channel
intermediate time 1
intermediate time 2
intermediate time 3
intermediate time 4
intermediate time 5
intermediate time 6
intermediate time 7
intermediate time 8
Banana socket for RS-485
Page 3
Page 3