Individual Adjustment Of The Channels - ALGE-Timing TdC 8000 Manual

4.2.3.

Individual adjustment of the channels

You can adjust each channel individual. When you turn the TdC 8000 on and clear the memory you
have always all channels active.
- If you press <MENU> and <BLOCK> together it shows the setting of each channel in the info-
display (6).
- Select the channel with ¢ and £ .
- Press <F1> to switch between activated and deactivated
- A (+) means, that the channel is activated.
- A (-) means, that the channel is deactivated.
- Leave the menu by pressing <MENU> and <BLOCK> together.
Info-display (6):
Channels on (+)/off (-):
+ + +
c0 c1 c2 c3 c4 c5 c6 c7 c8 c9
The adjustment above comes automatically when you turn the device after you cleared the memory:
The example bellow shows that channel c3 and c4 is switched off:
Channels on (+)/off (-):
+ + +
c0 c1 c2 c3 c4 c5 c6 c7 c8 c9
Version:E-00-08-08
TdC 8000 for Equestrian
+ + + + + +
- - + + + +
CHANGE F1
+
CHANGE F1
+
Page 24
Page 24