ALGE-Timing TdC 8000 Manual page 51

RS 232c Interface:
Transfer Format: 1 start bit, 8 data bit, no parity bit, 1 stop bit
Transfer Speed: 9.600 Baud pre adjusted (adjustable: 2400, 4800, 19200)
Transfer Protocol: ASCII
nNNNN(CR) active start number
xNNNNxCCxxHH:MM:SS.zhtqxGR(CR)
xNNNNxCCMxHH:MM:SS.zhtqxGR(CR)
xNNNNxCDxxxxSSSSSS.zhxxxGR(CR)
xNNNNxTOxxxxSSSSSS.zhxxxGR(CR)
xNNNNxRTxxxxSSSSSS.zhxxxGR(CR)
xNNNNxRTTxxxSSSSSS.zh(CR)
xNNNNxPxxxxxxxx+pp.pp(CR)
iNNNNxPxxxxxxxxxpp.pp(CR)
xNNNNxPTMxxxxxxxpp.pp(CR)
xNNNNxTPxxxxxxxxpp.pp(CR)
xNNNNxPTOxxxxxx+tt.tt(CR)
iNNNNxPTOxxxxxxxtt.tt(CR)
x
NNNN
CC
C0
CCM
CD
TO
RT
RTT
HH:MM:SS.zhtq
SSSSSS.zh
GR
P
PTM
TP
PTO
+
pp.pp
tt.tt
(CR)
The following characters could be the first digit:
x blank
? time without valid start number
c cleared time (with <CLEAR>)
d times cleared through disqualification
i times input manual: <INPUT>
n new start number shown in finish display (8)
RS 485 Interface:
Version: E-01-08-08
TdC 8000 for Equestrian
time of day
time of day (manual impulse)
countdown time
time-out
run time
run time including penalty time
penalty points for obstacle drop
correction of penalty points for obstacle drop
penalty points from time violation
total points (barrier drop and time violation)
penalty points for obstacle setup
correction of penalty seconds for obstacle setup
blank
start number (four digits)
timing channels (c0 to c9)
channel 0 (start) C1
manual impulse (with <START> or <STOP> from keyboard 9 or 15)
countdown
time-out
run time
run time, including penalty time
time in hours, minutes, seconds, and 1/10000 seconds
time in seconds and 1/100 seconds
group for team competition (from 01 to 99, no input for groups = 00)
penalty points for obstacle drop
penalty points for time violation
total points (obstacle drop and time violation)
penalty points for obstacle setup
penalty points or penalty seconds are added
penalty points
penalty seconds
carriage return
no function
channel 1 (finish) C9
Page 51
channel 9 (time-out)
Page 51