ALGE-Timing TdC 8000 Manual page 58

<INPUT> (keyboard 15)
- Time-out for set up of obstacle by pressing handswitch (channel 9). It stops the running time.
When the time is stopped it is possible to input a penalty time (display 8, right number). The
penalty time must be confirmed with <ENTER> (keyboard 15). It is possible to switch
between penalty seconds and penalty points with the cursor keys. This penalty time is
added
- When a rider reaches the finish it stops the run time. The penalty points from time violation
are calculated automatically.
- Press key <F3> to calculate the total run time including all penalty seconds.
- Input start number for the next competitor with keyboard (9), e.g. start number 2
- Confirm with <ENTER> (keyboard 9)
- etc.
Adjustments that you have to make before the race starts:
Before you start a race you have to check and maybe change some adjustments at the TdC 8000.
Press <ALT> and <MENU> at the same time to open the main menu. If can get direct into the any
sub menu by input of the menu number with keyboard (15) and confirm it with <ENTER>.
Penalty Points: Menu 36
At the time penalty jumping you do not have penalty points that are given in seconds. The penalty
seconds for obstacle drop you can adjust in this menu. You can set the penalty points from 0.01 to
99.99.
Menu 36: PENALTY POINTS = 04.00
Save with: ENTER
Pre adjusted value:
Time Violation 1:
You can adjust the penalty seconds for time violation. The adjustment is between 0 and 99 possible.
The penalty seconds are added for each started second time violation. Normally time violation it is 1
second.
Menu 37: TIME VIOLATION 1 = 01
Save with: ENTER
Pre adjusted value:
Version:E-00-08-08
TdC 8000 for Equestrian
immediately to the run time.
Penalty Points = 04.00
4 seconds
Menu 37 Time Violation = 0,25
1 second
Adjusted penalty seconds
Save and exit with <ENTER>
Adjusted time penalty
Save and exit with <ENTER>
Page 58
Page 58