Function-Keyboard (14) - ALGE-Timing TdC 8000 Manual

For equestrian
Hide thumbs Also See for TdC 8000:
Table of Contents

Advertisement

If you press <MENU> and <INPUT> at the same time you can change the run time,
memory time or intermediate time.
Each start number that you input, you must confirm with <ENTER>.
Increment start number: -
-
down: press <ALT> and <ENTER> together
3.2.3.

Function-Keyboard (14)

To confirm a YES/NO question
If you do not confirm a YES/NO question
If you press <PRINT> it switches the printer into the buffer mode. This means that all
information for the printer will be stored in the buffer. If you press again
<PRINT> it will
you change the
If you press <ALT> and <PRINT> together it switches the printer off. All printer informa
tion is now lost. If you press <PRINT> or <ALT> and <PRINT> again it switches the
printer on.
If you press <MENU> and <PRINT> together it prints all adjustments of the main
menu.
To test the TdC 8000 (see chapter 2.9 on page 18).
Key has no function yet.
To print the Classement (see chapter 4.5 on page 44).
Cursor-key up
Cursor-key down
It goes always together with another key. You have to press first <ALT> and then the
second key. Do not release <ALT> before you pressed the second key. <ALT>
has a
function together with <CLEAR>, <BLOCK> , <MENU>, and <PRINT>.
It goes always together with another key. You have to press first <MENU> and then the
second key. Do not release <MENU> before you pressed the second key. <MENU>
has a function with <ALT>, <INPUT>, <PRINT>, and <BLOCK>.
Function key 1:
Function key 2:
Function key 3:
Function key 4:
Memory for mass arrivals at the finish or intermediate time (see chapter 4.4 on page
42).
Version:E-00-08-08
TdC 8000 for Equestrian
up:
print all the data from the buffer. This function is manly to use when
paper.
To select in a menu of the info-display (6) when the text is placed at
the right side in line 1.
To select in a menu of the info-display (6) when the text is placed at
the right side in line 2.
To select in a menu of the info-display (6) when the text is placed at
the right side in line 3.
To select in a menu of the info-display (6) when the text is placed at
the right side in line 4.
press <ENTER>
Page 22
Page 22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TdC 8000 and is the answer not in the manual?

Questions and answers

Table of Contents