Call Data Through The Rs 232 Interface - ALGE-Timing TdC 8000 Manual

ID for Channel 4 in Parallel Slalom: Menu 27
RS232 question:
RS232 order:
Adjustable:
Start Channel for Dual Timer: Menu 28
RS232 question:
RS232 order:
Adjustable:
Ranking for Dual Timer:
RS232 question:
RS232 order:
Adjustable:
Printing Times for Speed:
RS232 question:
RS232 order:
Adjustable:
Measuring Distance Speed:
RS232 question:
RS232 order:
Adjustable:
Measuring Unit for Speed:
RS232 question: SPU?
RS232 order: SPU=kmh
Adjustable: kmh, m/s or mph
Min. Speed: Menu 33
RS232 question: MINSP?
RS232 order: MINSP=0010
Adjustable: 1 to 9999
Penalty Points
RS232 question: PP?
RS232 order: PP = 04.00
7.2.3.

Call Data through the RS 232 Interface

Through the RS 232 interface you can call all date of the memory of the TdC 8000 e.g. from a PC.
Each command is closed with a Carriage Return (in the following examples it is listed as (CR) ).
If you want a classement of intermediate times, you must identify the channel number (C2 to C9).
If you want a "SINGLE" classement, you need to input also the data that you want transferred (e.g.
start numbers, start number blocks, groups).
Classement "NOT FINISHED":
NOF(CR) all competitors that did not finished the race
Classement "DISQUALIFIED":
DIS(CR) all disqualified competitors
Classement "START ORDER":
STO(CR) Start order for the 2nd heat (for BIBO)
Classement "ALL:
CALRT(CR) Classement of the run time from all competitors
Version:E-00-08-08
TdC 8000 for Equestrian
IDC4?
IDC4=BLUE
B or L (blue or left)
STS?
STS=SEPARATE
SEPARATE, COMMON
Menu 29
RNKC?
RNKC=SEPARATE
SEPARATE, COMMON
Menu 30
PRT?
PRT=OFF
OFF or ON
Menu 31
DST?
DST=0100
+ 1 to 9999
Menu 32
Menu 34
Adjustable: 0.1 to 99.99
Time Violation 1:
RS232 question: TV1?
RS232 order: TV1 = 00.25
Adjustable: 0 to 99.99
Time Violation 2:
RS232 question: TV2?
RS232 order: TV2 = 01.00
Adjustable: 0 to 99.99
Parcour Time 1:
RS232 question: PAT1?
RS232 order: PAT1 = 000.00
Adjustable: 0 to 999.99
Parcour Time 2:
RS232 question: PAT2?
RS232 order: PAT2 = 000.00
Adjustable: 0 to 999.99
Block Time 1:
RS232 question: BT1?
RS232 order: BT1 = 000.00
Adjustable: 0 to 999.99
Block Time 2:
RS232 question: BT2?
RS232 order: BT2 = 000.00
Adjustable: 0 to 999.99
Countdown Time:
RS232 question: CDT?
RS232 order: CDT=00:01:00.00
Adjustable: 00:00:00.00 to 23:59:59.99
D-Board Count Down: Menu 43
RS232 question: DBCD?
RS232 order: DBCD=ON
Adjustable: ON or OFF
Page 102
Menu 36
Menu 37
Menu 38
Menu 39
Menu 40
Menu 41
Menu 42
Page 102