4.3.2.4.2. Editing A Run Time - ALGE-Timing TdC 8000 Manual

- The info-display (6) shows the valid finish time of the start number shown in the finish display (2):
Input:
- You can change the start number with the cursor keys (¢ and £) or input the start number with
the finish keyboard (15).
- Confirm the start number with <ENTER>
- If you have already different times for this start number it show the following::
Input:
c0015 C1
c0015 C1
- You can over write the valid run time with the numbers of the finish keyboard (15) (manual input
of
the run time).
- If you want to copy the selected time to another start number press <F1> and assign it.
- To disqualify the competitor press <F2>. The disqualified time is marked with a d. For a disqualifi
cation it clears the start time, finish time, and run time.
- Exit by pressing <MENU> and <INPUT> of the finish keyboard (15) together.
Attention: - If it shows 00:00:00.000 as run time, it means that you have no run time for this
start
number.
- If you make another run time valid, it stores the old run time with a c (clear).
e.g.:

4.3.2.4.2. Editing a Run Time

You can edit the following:
- over write a run time with keyboard (15)
- you can copy the run time to another start number.
- disqualification of a competitor (start number)
Changing a memory time:
- Press <MENU> and <INPUT> together
- Press <F2>
- Press <ENTER>
- The info-display (6) shows the valid run time of the start number shown in the finish display (8):
Input:
- You can change the start number with the cursor keys (¢ and £) or input the start number with
the finish keyboard (15).
- Confirm the start number with <ENTER>
- The cursor is now on the first digit of the time:
Version:E-00-08-08
TdC 8000 for Equestrian
0015 C1 10:01:35.139
0015 C1 10:01:35.139
10:01:28.143
10:01:28.163
c 0009 C1 00:01:35.486
0015 RT 0000055.139
e.g. start number 15
NEW No F1
DISQU. F2
valid finish time
NEW No F1
DISQU. F2
e.g. start number 15
NEW No F1
DISQU. F2
Page 28
Page 28