4.3.2.4. Editing Run Times And Finish Times; Editing A Finish Time - ALGE-Timing TdC 8000 Manual

- You can increment through the finish list with the cursor keys (¢ and £) or input the start
number with the finish keyboard (15).
- Confirm the start number with <ENTER>
- The cursor is now on the first digit of the time:
Input:
c0015 C1
?0015 C1
- You can select the correct finish time with the cursor key (¢ and £). When you press
<ENTER> it makes the selected time valid.
- You can also over write the valid finish time (first line) with the numbers of the finish keyboard
(15) (manual input of the finish time).
- If you want to give the selected time to another start number press <F1> and input the new
start number.
- To disqualify the competitor (start number) press <F2>. The disqualified time is marked with
a d. For a disqualification it clears the start time, finish time, and run time.
- Exit the input menu by pressing <INPUT> of the finish keyboard (15) again.
Attention: - If it shows 00:00:00.000 as finish time, it means that you have no finish time
for this start number.
- If you make another finish time valid, it stores the old finish time with a c (clear).
E.g.:

4.3.2.4. Editing Run times and Finish Times

If you press <MENU> and <INPUT> of the finish keyboard (15) together you get into the menu to
edit run times and finihs times.
- Press <MENU> and <INPUT> at the same time.
- The info-display (6) shows the following:
Input times:
timeContinue: ENTER
- Select the time you want to change with <F1>, <F2> or ¢ and £.
- Changes are made like described in following three chapters.
- Exit the menu by pressing <MENU> and <INPUT> together.

4.3.2.4.1. Editing a Finish time

You can edit the following:
- over write a run time with keyboard (15)
- copy the run time of a start number to another start number.
- Disqualification of a competitor (start number)
Changing a run time:
- Press <MENU> and <INPUT> together
- Press <F1>
- Press <ENTER>
Version: E-01-08-08
TdC 8000 for Equestrian
0015 C1 13:15:35.486
13:10:12.498
13:17:28.938
c 0009 FT 12:15.22.157
NEW No F1
DISQU. F2
time not valid (e.g. from <BLOCK>
FINISH TIME< F1
RUN TIME F2
Page 27
valid finish time
time cleared
with <CLEAR>
<F1> to change the
run time
<F2> to change the
memory
Page 27