System Log; Figure 5.85 Diagnostics > System Log > Logging Service - Wieland wienet FS8 Series User Manual

Item Description
IPv6 Address Enter the IP address or host name of the station you want the Switch to ping. The
initial value is blank. The IP Address or host name you enter is not retained across
a power cycle. Host names are composed of series of labels concatenated with
dots. Each label must be between 1 and 63 characters long, and the entire host-
name has a maximum of 64 characters.
Count Enter the number of echo requests you want to send. The default value is 4. The
value ranges from 1 to 5. The count you enter is not retained across a power cy-
cle.
Interval (in sec) Enter the interval between ping packets in seconds. The default value is 1. The
value ranges from 1 to 5. The interval you enter is not retained across a power
cycle.
Size (in bytes) Enter the size of ping packet. The default value is 56. The value ranges from 8 to
5120. The size you enter is not retained across a power cycle.
Ping Results Display the reply format of ping.
PING 2222::777 (2222::777): 56 data bytes
--- 2222::777 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Or:
PING 2222::717 (2222::717): 56 data bytes
64 bytes from 2222::717: icmp6_seq=0 ttl=128 time=10.0 ms
64 bytes from 2222::717: icmp6_seq=1 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=2 ttl=128 time=0.0 ms
64 bytes from 2222::717: icmp6_seq=3 ttl=128 time=0.0 ms
--- 2222::717 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss round-trip
min/avg/max = 0.0/2.5/10.0 ms
Apply Click Apply to display ping result for the IP address.
5.12.4

System Log

5.12.4.1 Logging Service
The Logging Service page allows you to setup the logging services feature for the system log.
To access this page, click Diagnostics > System Log > Logging Service.
Figure 5.85 Diagnostics > System Log > Logging Service
The following table describes the items in the previous figure.
Item Description
Logging Service Click Disabled or Enabled to set the Logging Service status.
Apply Click Apply to save the values and update the screen.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
99