Dual Image; Save Configuration; User Account; Figure 5.93 Tools > Dual Image - Wieland wienet FS8 Series User Manual

The following table describes the items in the previous figure.
Item Description
Upgrade Method Click the drop-down menu to select the upgrade method: TFTP or HTTP.
Server IP Enter the IP address of the upgrade server.
File Name Enter the file name of the new firmware version.
Upgrade Type Click a type to define the upgrade method: image, startup configuration, or running
configuration.
Image Click the format for the image type: 7710E_2C_1_00_13.bix (Active) or vmlinux.bix
(backup).
Upgrad Click Upgrade to upgrade to the current version.
5.13.4

Dual Image

The Dual Image page allows you to setup an active and backup partitions for firmware image redundancy.
To access this page, click Tools > Dual Image.
Figure 5.93 Tools > Dual Image
The following table describes the items in the previous figure.
Item Description
Active Image Click the format for the image type: Partition0 (Active) or Partition1 (backup).
Save Click Save to save and keep the new settings.
The ensuing table for Image Information 0/1 settings are informational only: Flash Partition, Image Name,
Image Size and Created Time.
5.13.5

Save Configuration

To access this page, click Tools > Save Configuration.
Click Save Configuration to FLASH to have configuration changes you have made to be saved across a
system reboot. All changes submitted since the previous save or system reboot will be retained by the
Switch.
5.13.6

User Account

The User Account page allows you to setup a user and the related parameters.
To access this page, click Tools > User Account.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
105