Garp; Figure 5.25 L2 Switching > Garp > Garp Settings - Wieland wienet FS8 Series User Manual

5.7.4.4 Port-VLAN Mapping
To access this page, click L2 Switching > 802.1Q VLAN > Port-VLAN Mapping.
The ensuing table for Port-VLAN Mapping Table settings are informational only: Port, Mode, Administra-
tive VLANs and Operational VLANs.

5.7.5 GARP

The Generic Attribute Registration Protocol (GARP) is a local area network (LAN) protocol. The protocol
defines procedures for the registration and de-registration of attributes (network identifiers or addresses)
by end stations and switches with each other.
5.7.5.1 GARP Settings
To access this page, click L2 Switching > GARP > GARP Settings.
Figure 5.25 L2 Switching > GARP > GARP Settings
The following table describes the items in the previous figure.
Item Description
Join Time Enter a value to specify the time between the transmission of GARP PDUs regis-
tering (or re-registering) membership for a VLAN or multicast group in centisec-
onds. Enter a number between 6 and 600. An instance of this timer exists for each
GARP participant for each port.
Leave Time Enter a value to specify the time to wait after receiving an unregister request for a
VLAN or multicast group before deleting the associated entry, in centiseconds.
This allows time for another station to assert registration for the same attribute in
order to maintain uninterrupted service. Enter a number between 12 and 3000. An
instance of this timer exists for each GARP participant for each port.
Leave All Time Enter a value to specify the Leave All Time controls how frequently Leave All PDUs
are generated. A LeaveAll PDU indicates that all registrations will shortly be dereg-
istered. Participants will need to rejoin in order to maintain registration. The Leave
All Period Timer is set to a random value in the range of LeaveAllTime to
1.5*LeaveAllTime. The timer is specified in centiseconds. Enter a number between
12 and 12000. An instance of this timer exists for each GARP participant for each
port.
Apply Click Apply to save the values and update the screen.
The ensuing table for GARP Information settings are informational only: Join Time, Leave Time and Leave
All Time.
5.7.5.2 GVRP Settings
The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN Registration Protocol or
Generic VLAN Registration Protocol) protocol which facilitates control of virtual local area networks
(VLANs) within a larger network.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
55