Figure 5.34 L2 Switching > Multicast > Mld Snooping > Mld Static Group - Wieland wienet FS8 Series User Manual

Figure 5.34 L2 Switching > Multicast > MLD Snooping > MLD Static Group
The following table describes the items in the previous figure.
Item Description
VLAN ID Enter the VLAN ID to define the local MLD Static Group.
Group IP Address Enter the IP address associated with the static group.
Member Ports Enter the ports designated with the static group.
Add Click Add to add a MLD static group.
The ensuing table for MLD Static Groups Status settings are informational only: VLAN ID, Group IP Ad-
dress, Member Ports and Modify.
Multicast Groups
To access this page, click L2 Switching > Multicast > MLD Snooping > Multicast Groups.
The ensuing table for Multicast Groups settings are informational only: ID, Group IP Address, Member
Ports, Type and Life (Sec).
Router Ports
To access this page, click L2 Switching > Multicast > MLD Snooping > Router Ports.
The ensuing table for Router Ports settings are informational only: VLAN ID, Port and Expiry Time (Sec).
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
61