Figure 5.89 Diagnostics > Ddm - Wieland wienet FS8 Series User Manual

5 Managing Switch
Item Description
Diagnostic Alarm Click the drop-down menu to designate the announcement method: Disabled,
SysLog, E-mail, or SNMP.
Apply Click Apply to save the values and update the screen.
The ensuing table for Diagnostic Alarm Information settings are informational only: Diagnostic Alarm.
Figure 5.89 Diagnostics > DDM
The following table describes the items in the previous figure.
Item Description
High Alarm Click Enabled or Disabled to set the alarm state.
High Warning Click Enabled or Disabled to set the alarm state.
Low Alarm Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Low Warning
Apply Click Apply to save the values and update the screen.
The ensuing table for Vendor Info settings are informational only: Refresh (click to reload the vendor in-
formation), Port, Connector, Speed, VendorName, VendorOui, VendorPn, VendorRev, VendorSn and Date-
Code.
102 Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018