Figure 5.39 L2 Switching > Spanning Tree > Stp Port Advanced Settings; Figure 5.40 L2 Switching > Spanning Tree > Mst Config Identification - Wieland wienet FS8 Series User Manual

5.7.9.4 STP Port Advanced Settings
The STP Port Advanced Settings page allows you to select the port list to apply this setting.
To access this page, click L2 Switching > Spanning Tree > STP Port Advanced Settings.
Figure 5.39 L2 Switching > Spanning Tree > STP Port Advanced Settings
The following table describes the items in the previous figure.
Item Description
Port Select Select the port to designate the STP settings.
Priority Click the drop-down menu to to designate a priority.
Apply Click Apply to save the values and update the screen.
The ensuing table for STP Port Status settings are informational only: Port, Identifier (Priority / Port Id),
Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost, Designated Bridge, Edge Port Conf/Oper,
P2P MAC Conf/Oper, Port Role and Port State.
5.7.9.5 MST Config Identification
The MST Config Identification page allows you to configure the identification setting name and the identi-
fication range.
To access this page, click L2 Switching > Spanning Tree > MST Config Identification.
Figure 5.40 L2 Switching > Spanning Tree > MST Config Identification
The following table describes the items in the previous figure.
Item Description
Configuration Enter the identifier used to identify the configuration currently being used. It may
Name be up to 32 characters.
Revision Level Enter the identifier for the Revision Configuration, range: 0 to 65535 (default: 0).
Apply Click Apply to save the values and update the screen.
The ensuing table for MST Configuration Identification Information settings are informational only: Config-
uration Name and Revision Level.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
65