Figure 5.41 L2 Switching > Spanning Tree > Mst Instance Id Settings; Figure 5.42 L2 Switching > Spanning Tree > Mst Instance Priority Settings - Wieland wienet FS8 Series User Manual

5 Managing Switch
5.7.9.6 MST Instance ID Settings
The MST Instance ID Settings page allows you to edit the MSTI ID and VID List settings.
To access this page, click L2 Switching > Spanning Tree > MST Instance ID Settings.
Figure 5.41 L2 Switching > Spanning Tree > MST Instance ID Settings
The following table describes the items in the previous figure.
Item Description
MSTI ID Enter the MST instance ID (0-15).
VID List Enter the pre-configured VID list.
Move Click Move to save the values and update the screen.
The ensuing table for MST Instance ID Information settings are informational only: MSTI ID and VID List.
5.7.9.7 MST Instance Priority Settings
The MST Instance Priority Settings allows you to specify the MST instance and the bridge priority in that
instance.
To access this page, click L2 Switching > Spanning Tree > MST Instance Priority Settings.
Figure 5.42 L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in the previous figure.
Item Description
MSTI ID Click the drop-down menu to specify the MST instance.
Priority Click the drop-down menu set the bridge priority in the specified MST instance.
Apply Click Apply to save the values and update the screen.
The ensuing table for MST Instance Priority Information settings are informational only: MSTI ID, Priority
and Action.
66 Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018