Figure 5.48 L2 Switching > Loopback Detection > Port Settings - Wieland wienet FS8 Series User Manual

5 Managing Switch
Figure 5.48 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
Item Description
Port Select Enter the port to define the local loopback detection setting.
Enabled Select Enabled or Disabled to setup the Loopback Detection function.
Click Apply to save the values and update the screen.
Apply
The ensuing table for Loopback Detection Port Information settings are informational only: Port, Enable
State and Loop Status.
70 Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018