Figure 5.18 L2 Switching > Link Aggregation > Lag Management - Wieland wienet FS8 Series User Manual

The following table describes the items in the previous figure.
Item Description
Load Balance Select the radio button to select the Load Balance Setting: MAC Address or IP/MAC
Algorithm Address.
Apply Click Apply to save the values and update the screen.
The ensuing table for Load Balance Information settings are informational only: Load Balance Algorithm.
5.7.3.2 LAG Management
Link aggregation is also known as trunking. It is a feature available on the Ethernet gateway and is used
with Layer 2 Bridging. Link aggregation allows for the logical merging of multiple ports into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG Management.
Figure 5.18 L2 Switching > Link Aggregation > LAG Management
The following table describes the items in the previous figure.
Item Description
LAG Click the drop-down menu to select the designated trunk group: Trunk 1~8.
Name Enter an entry to specify the LAG name.
Type Click the radio button to specify the type mode: Static or LACP.
Ports Click the drop-down menu to select designated ports: Port1-10.
Apply Click Apply to save the values and update the screen.
The ensuing table for LAG Management Information settings are informational only: LAG, Name, Type,
Link State, Active Member, Standby Member, Edit (click to modify the settings) and Clear (click to load
default settings).
5.7.3.3 LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed and flow control func-
tions.
In this example we will configure a LAG between the following switches:
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
49