Figure 5.70 Qos > Rate Limit > Egress Bandwidth Control; Figure 5.71 Qos > Rate Limit > Egress Queue - Wieland wienet FS8 Series User Manual

5 Managing Switch
5.10.3.2 Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control for a listed port.
To access this page, click QoS > Rate Limit > Egress Bandwidth Control.
Figure 5.70 QoS > Rate Limit > Egress Bandwidth Control
The following table describes the items in the previous figure.
Item Description
Port Enter the port number to set the Egress Bandwidth Control.
State Select Disabled or Enabled to set the Egress Bandwidth Control state.
Rate (Kbps) Enter the value in Kbps (16 to 1000000) to set Egress Bandwidth rate.
Apply Click Apply to save the values and update the screen.
The ensuing table for Egress Bandwidth Control Status settings are informational only: Port and Egress
Rate Limit (Kbps).
5.10.3.3 Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
Figure 5.71 QoS > Rate Limit > Egress Queue
The following table describes the items in the previous figure.
88 Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018