Dhcp Auto Provision; Ipv6 Settings; Figure 5.11 System > Dhcp Auto Provision; Figure 5.12 System > Ipv6 Settings - Wieland wienet FS8 Series User Manual

5.6.3 DHCP Auto Provision

The DHCP Auto Provision feature allows you to load configurations using a server with DHCP options.
Through the remote connection, the Switch obtains information from a configuration file available through
the TFTP server.
To access this page, click System > DHCP Auto Provision.
Figure 5.11 System > DHCP Auto Provision
The following table describes the items in the previous figure.
Item
Status
Apply
The ensuing table for DHCP Auto Provision Information settings are informational only: Status.

5.6.4 IPv6 Settings

To access this page, click System > IPv6 Settings.
Figure 5.12 System > IPv6 Settings
The following table describes the items in the previous figure.
Item
Auto Configuration
IPv6 Address
Gateway
DHCPv6 Client
Apply
The ensuing table for IPv6 Information settings are informational only: Auto Configuration, IPv6 In Use
Address, IPv6 In Use Router, IPv6 Static Address, IPv6 Static Router and DHCPv6 Client.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
Description
Select the radio button to enable or disable the DHCP Auto Provisioning Setting.
Click Apply to save the values and update the screen.
Description
Select the radio button to enable or disable the IPv6.
Enter the IPv6 address for the system.
Enter the gateway address for the system.
Enter the DHCPv6 address for the system.
Click Apply to save the values and update the screen.
5 Managing Switch
43