Logging Message; Figure 5.4 Monitoring > Logging Message - Wieland wienet FS8 Series User Manual

5.5.2 Logging Message

The Logging Message Filter page allows you to enable the display of logging message filter.
To access this page, click Monitoring > Logging Message.
Figure 5.4 Monitoring > Logging Message
The following table describes the items in the previous figure.
Item Description
Target Click the drop-down menu to select a target to store the log messages.
Severity The setting allows you to designate a severity level for the Logging Message Filter
function.
Click the drop-down menu to select the severity level target setting. The level op-
tions are:
Category Click the drop-down menu to select the category level target setting.
View Click View to display all Logging Information and Logging Message information.
Refresh Click Refresh to update the screen.
Clear buffered Click Clear buffered messages to clear the logging buffer history list.
messages
The ensuing table for Logging Information table settings are informational only: Target, Severity and Cat-
egory.
The ensuing table for Logging Message table settings are informational only: No., Time Stamp, Category,
Severity and Message.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018

Buffered: Store log messages in RAM. All log messages are cleared after
system reboot.

File: Store log messages in a file.

emerg: Indicates system is unusable. It is the highest level of severity.

alert: Indicates action must be taken immediately.

crit: Indicates critical conditions.

error: Indicates error conditions.

warning: Indicates warning conditions.

notice: Indicates normal but significant conditions.

info: Indicates informational messages.

debug: Indicates debug-level messages
5 Managing Switch
37