Figure 5.79 Management > Snmp > Snmp User Settings - Wieland wienet FS8 Series User Manual

5 Managing Switch
The ensuing table for Community Status settings are informational only: No., Community Name, Access
Right and Delete (click to delete the desired community name).
5.11.2.3 SNMP User Settings
The SNMP User Settings page allows you to create SNMP groups. The users have the same level of security
and access control permissions as defined by the group settings.
To access this page, click Management > SNMP > SNMP User Settings.
Figure 5.79 Management > SNMP > SNMP User Settings
The following table describes the items in the previous figure.
Item Description
User Name Enter a community name (up to 20 characters).
Access Right Click read-only or read-write to define the access right for the profile.
Encrypted Click the option to set the encrypted option for the user setting.
Auth-Protocol Click the drop-down menu to select the authentication level: MD5 or SHA. The
field requires a user password.
Password Enter the characters to define the password associated with the authentication
protocol.
Priv-Protocol Click the drop-down menu to select an authorization protocol: none or DES. The
field requires a user password.
Password Enter the characters to define the password associated with the authorization pro-
tocol.
Add Click Add to save the values and update the screen.
The ensuing table for User Status settings are informational only: User Name, Access Right, Auth-Proto-
col, Priv-Protocol and Delete (click to delete the desired user name).
94

MD5: specify HMAC-MD5-96 authentication level

SHA: specify HMAC-SHA authentication protocol

None: no authorization protocol in use

DES: specify 56-bit encryption in use
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018