Wieland wienet FS8 Series User Manual page 89

Item Description
Port Click the drop-down menu to select the port to define the Egress queue.
Queue Click the drop-down menu to set the queue order for the Egress setting
State Click Disabled or Enabled to set the Egress queue state.
CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set Egress Bandwidth rate.
Apply Click Apply to save the values and update the screen.
The ensuing table for FE1 Egress Per Queue Status settings are informational only: Queue Id and Egress
Rate Limit (Kbps).
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
89