Figure 5.31 L2 Switching > Multicast > Igmp Snooping > Igmp Static Groups; Figure 5.32 L2 Switching > Multicast > Mld Snooping > Mld Settings - Wieland wienet FS8 Series User Manual

5.7.7.3 IGMP Static Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups.
Figure 5.31 L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups
The following table describes the items in the previous figure.
Item Description
VLAN ID Select the VLAN ID to define IGMP static group.
Group IP Address Enter the IP address assigned to the VLAN ID.
Member Ports Enter the port numbers to associate with the static group.
Apply Click Apply to save the values and update the screen.
The ensuing table for IGMP Static Groups Status settings are informational only: VLAN ID, Group IP
Address, Member Ports and Modify.
Multicast Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > Multicast.
The ensuing table for Multicast Groups settings are informational only: VLAN ID, Group IP Address, Mem-
ber Ports, Type and Life (Sec).
Router Ports
To access this page, click L2 Switching > Multicast > IGMP Snooping > Router Ports.
The ensuing table for Router Ports settings are informational only: VLAN ID, Port and Expiry Time (Sec).
5.7.7.4 MLD Snooping
The MLD Snooping page allows you to select the snooping status (enable or disable), the version (v1 or
v2) and the enabling/disabling of the report suppression for the MLD querier, which sends out periodic
general MLD queries and are forwarded through all ports in the VLAN.
MLD Settings
To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Settings.
Figure 5.32 L2 Switching > Multicast > MLD Snooping > MLD Settings
The following table describes the items in the previous figure.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
59