Figure 4.5 Wall Mount Installation - Wieland wienet FS8 Series User Manual

Note
N OTE
Make sure the screws dimensions are suitable for use with the wall mounting plate.
Do not completely tighten the screws into the wall. A final adjustment may be needed before fully securing the wall
mounting plates on the wall.
11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it forward to lock in place, see the following
figure.
13. Once the device is installed on the wall, tighten the screws to secure the device.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018

Figure 4.5 Wall Mount Installation

4 Switch Installation
23