5.12 Diagnostics
Through the Diagnostics function configuration of settings for the Switch diagnostics is available.
5.12.1
Cable Diagnostics
The Cable Diagnostics page allows you to select the port for applying a copper test.
To access this page, click Diagnostics > Cable Diagnostics.
Figure 5.82 Diagnostics > Cable Diagnostics
The following table describes the items in the previous figure.
Item
Description
Port
Click the drop-down menu to select a pre-defined port for diagnostic testing.
Giga ports are displayed with a channel A to D designation.
Copper Test
Click Copper Test to display the test result for the selected port.
The ensuing table for Test Result settings are informational only: Port, Channel A, Cable Length A, Channel
B, Cable Length B, Channel C, Cable Length C, Channel D and Cable Length D.
5.12.2
Ping Test
The Ping Test page allows you to configure the test log page.
To access this page, click Diagnostics > Ping Test.
Figure 5.83 Diagnostics > Ping Test
The following table describes the items in the previous figure.
Wieland Electric GmbH | BA001047 (Rev. A) | 06/2018
5 Managing Switch
97