Basic Examples Of Control Connections - Danfoss VLT CDS302 Operating Instructions Manual

How to Install

3.3.14 Basic Examples of Control Connections

Controls using an external controller with 0-10 V signal. It
is not necessary to change any parameters, as this is the
default value.
3 3
Illustration 3.28
Controls using an external controller with 4-20 mA signal.
Change switch 53 from U to I. It is not necessary to change
any parameters, as this is the default value.
Illustration 3.29
28
Operating Instructions VLT
®
MG34M302 - VLT is a registered Danfoss trademark/Commercial Compressor
®
CDS302 and CDS303