Basic Information - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
7.1

Basic information

The HDD or SSD and the installation frame together make up the HDD module
or SSD module.
The server is shipped with one of the following HDD or SSD subsystems:
– 3.5-inch HDD subsystem:
Up to two 3.5-inch non hot-plug SATA HDDs can be installed. The HDDs are
connected to the related controller with a cable.
– 2.5-inch HDD/SSD subsystem:
Up to eight 2.5-inch SAS/SATA HDD/SSD modules or up to four SAS/SATA
HDD/SSD modules and up to four PCIe SSD can be installed. Each
HDD/SSD module can accommodate SAS/SATA HDD/SSD or PCIe SSD
with a 2.5-inch format. The module is connected to the HDD/PCIe backplane
wirelessly. This allows HDD/SSD modules to be plugged in or pulled out
easily.
I
For information on RAID controllers controlling the HDD/SSD modules
see chapter
130
"Expansion cards and backup units" on page
Upgrade and Maintenance Manual
171.
TX1320 M4