Expansion cards and backup units
I
For further instructions regarding controller settings, see the
accompanying documentation.
Ê If applicable, attach the required slot bracket to the expansion card, see
section
"Installing a slot bracket" on page
Ê If applicable, connect internal cables to the expansion card.
I
For the cable plan, see chapter
Figure 91: Installing EP5x0i controller
Ê Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot (see arrow).
Ê Fold down slot cover clamp until it locks in place.
Ê If applicable, connect a FBU to the expansion card, see section
an FBU" on page
182
197.
Upgrade and Maintenance Manual
173.
"Appendix B" on page
341.
"Installing
TX1320 M4